Simple hardware tweak on the gimbals and software selections required.
Next job is to flash the firmware to OpenTX. A dodgy SmartieParts board has stalled that operation, waiting for a new one, stay tuned.
Sunday 18 December 2016
Turnigy 9X mode change
Here's how to change a Turnigy 9X V2 from Mode 1 (throttle on the right) to Mode 2 (throttle on the left)
Simple hardware tweak on the gimbals and software selections required.
Next job is to flash the firmware to OpenTX. A dodgy SmartieParts board has stalled that operation, waiting for a new one, stay tuned.
Simple hardware tweak on the gimbals and software selections required.
Next job is to flash the firmware to OpenTX. A dodgy SmartieParts board has stalled that operation, waiting for a new one, stay tuned.
Subscribe to:
Posts (Atom)